We are looking forward to help you!
Contact us »Especially for new developments, prototypes, sample parts, new start-ups, mould changes and for random samples of serial parts, the quality must be recorded or checked.
A large number of evaluations and analyses can be derived from the data obtained.
Download: QMap Description
For this purpose, Porsche AG recently developed a Quality Map (Q-Map for short) for the documentation of components, which is based on Excel and can be evaluated.
For this purpose, Porsche AG recently developed a Quality Map (Q-Map for short) for the documentation of components, which is based on Excel and can be evaluated.
Due to the close cooperation between Porsche AG and BMB GmbH, the Q-Map was completely revised with the help of a new part development as part of a bachelor thesis. The bachelor student from Porsche AG was supported by BMB GmbH, instructed in the NDT test procedures and was able to participate in practical evaluations and evaluations of component tests.
This enabled the existing Q-Map to be adapted to the current status. The handling of the input system was improved by a clearer layout and increased user-friendliness.
The data from the test were transferred to the component simulation, so that the influence of defects in the component could also be simulated at Porsche AG.
The BMB GmbH is currently creating a system-independent input system that can be viewed worldwide and further pursues the Q-Map character. In the future, these systems should reduce the time required, even for very extensive documentation, to a minimum.
Download: QMap Description
In which sector of the component is the fault exactly? What type of defect is it and to what extent? Answers to these questions are provided by our touch screen evaluation, in which all these questions are documented during X-ray inspection, for example.
Since 2010 you can further optimize your production with us as an extended workbench. Thanks to our online order folder, you are able to access your quality feedback without long waiting times. You can also collaborate with us on your personalised order folder, for example to save time-consuming email communication.
In order to be able to precisely analyze and discuss the entire process even after the test procedure, it is possible for us to record all X-ray tests preventively. In this way, possible ambiguities can be traced even years later, see the following picture for illustration.
You want to follow our test results of your components in real time ?
We make this possible for you with our online image archive, which is backed up in 2 data centers worldwide.
NIO or critical images can be easily commented by you and checked by our qualified personnel.
German car manufacturers are striving for the complete conversion of a fingerprint in code form for each (documentation-required) component.
With the help of a special camera, a Data Matrix Code, which has previously been attached to the component, can be read and assigned information.
This information can be related to the casting date and the inspection date of the part, giving each part a unique fingerprint.
This documentation is also sent to you in real time in tabular form.
The test report, which we create for you individually and digitally, contains information on the test equipment system or system parameters used, the test procedure, the test results and their display assessments.
All of our test reports are generated individually on the PC and are sent to you after an approval process and archived at the same time with us. This allows us to work for you in an environmentally friendly and cost-efficient way.
With the help of online document collaboration within Google Drive, we are able to work with multiple people on the same document at the same time.
By collaborating quickly with our clients, we can generate immense time benefits:
Test instructions tell our testers exactly how the test process is to run right down to the system parameters. We develop these details in digital form together with our customers and on the basis of current standards. All current test instructions and documents are stored as pdf documents in our self-developed touch screen system. In this way, we can ensure that only the current status of the document can be viewed by the inspector. The files can be viewed quickly, easily and for everyone on an intranet homepage.
Each of our inspectors has his own e-mail box, which he can access from any workstation equipped with a touch screen. In the event of a change to an inspection instruction, an e-mail is sent to all employees to eliminate sources of error due to outdated information. The Infomail provides the employee with a link to the new, revised inspection instruction.
With the help of a reference ball, which is attached to the component, an X-ray image is created. The image is labeled and the defect on the component is marked. After the image has been converted into a JPG file, the respective images are sent to you.
During the test, typical indicia of the penetration test are determined, separated and recorded under UV light and/or daylight, depending on the documentation required.
Would you like to have the opportunity to have a look at your parts at any time and from any location or would you like to have an internal agreement within different departments?
This is no longer a problem for you with our viewer. With this you have independent customer access, which allows you to view your scanned parts at any time.
Tomograms can be evaluated according to a given pore specification. The actual state of the tomogram can be determined or an O.K. or N.I.O. evaluation can be performed according to the specification. Furthermore, target/actual comparisons can be made using comparison data provided. Specific defects, such as blowholes, are evaluated by us for you with the aid of the tomograms in order to be able to make statements about their size and extent.
